Better pathfinder algorithm, allows tuning the lag spike compensation.
Smoother movement (when it's laggy).
Set the player animation to stand on attach.
Remove driver when they leave.
Only update velocity when it's necessary.
Apples only regrow where they first appear on trees, either on mapgen or when grown from saplings (meaning apples that were placed by players won't regrow).
Once the tree is cut down in full (leaves removed), regrowth will stop.
New apples only grow in daylight, and take the same time as a sapling to grow.
Iron at y = 0 was far too easy to find.
Adjust gold lower region to be twice the depth of highest level, like
all other ores.
Diamond at y = -500 was too easy to progress to.
Make diamond and mese block deeper to create a depth progression from
mese crystal to diamond, to reflect tool progression.
This all creates a satisfying 2^n depth progression, with lower regions
being at twice the depth of highest levels.
Use noises to create a varying mix in coniferous forest biomes:
Areas of large pines only, areas of small pines only, mixed areas.
While also having areas of high and low tree densities.
Saplings grow into large or small pines with equal chance.
Avoid hard-coded player inventory lists.
Expose `bones.player_inventory_lists` for mods to look up or change,
which player inventory lists are being dropped or placed into bones.
Acacia bush: Create a unique form different to normal bush, with more
leaf nodes at top than at base.
Acacia tree: Maximum height increased by 1 node. 2 extra nodes of
height variation.
Jungle tree: Add an extra node of height variation. Y-slices moved
downwards to be more balanced between trunk and branches, makes
branches more common.
Pine tree: Increase maximum height by 1 node. Add an extra node of
height variation.
Update sapling 'on place' protection checks for acacia and pine trees.
Match maximum spread density to maximum mapgen density for flowers.
Place 3 flora nodes at once instead of 1.
Change ABM chance value to 300 to match previous spread rate.
ABM becomes 3 times less intensive.
Use 128px textures with a slight blur to reduce distortion caused
by formspec texture scaling.
Cross is shifted slightly up and left to compensate for formspec
button image shift.
In survival mode, zoom is disabled, the binoculars item is needed to
allow a zoom with a 10 degree FOV, realistic for compact binoculars.
Creative mode or per-player creative privilege allows a zoom with a
15 degree field of view (the default MT engine zoom FOV).
Adds a direct resource of green dye, and a flower resource of black dye.
Completes the colour sequence: red, orange, yellow, green, blue, violet.
Makes all base dyes cultivatable and sustainable, without the presence
of coal.
Add the new flowers to the world with the same density variation as the
others, but obviously with different noise seeds. Results in more flowers
in a world and more variety of flower combinations.
Previously, body and limbs were stretched vertically by 1.125, creating
rectangular pixels on side faces. Head was unstretched.
Remove stretch of body and limbs, leaving the head unchanged.
No other change would excessively shorten the model, so also scale up
the model slightly, by * 1.05, such that the reduction factor for height is
equal to the increasing factor for width. This minimises the changes to
height and width.
Remove cape support.
Update the collisionbox to match.
Add missing license.txt.
Original recording by Ryding.
http://freesound.org/people/Ryding/
Found by Anth0rx, edited by paramat.
Add and use 'default.node_sound_snow_defaults()' function.
Some files or editors may use \r instand of \n like notepad++. If you copy
text written in notepad++ and pasted into the book. The book will only have
one page.
Uses the new player object property 'can zoom'.
In survival mode, use of zoom requires the binoculars item in
inventory.
Zoom is automatically allowed in creative mode and for players with
the 'creative' privilege.
The binoculars.update_player_property() function is global so can be
redefined by a mod for alternative behaviour.
In survival mode, use of the minimap requires the mapping kit item.
Minimap radar mode is always disabled in survival mode.
Minimap and minimap radar mode will be automatically enabled in creative mode
and for any player with the 'creative' privilege.
The 'map.update_hud_flags()' function is global so can be redefined by a mod for
alternative behaviour.
Make deeper, to compensate for ease of travel using 3D noise tunnels.
Make depth more progressive with value:
Ore, upper limit
Coal 64 no change
Iron 0 no change
Tin -32 > -64
Copper -16 > -128
Gold -64 > -256
Diamond -128 > -512
Mese crystal -64 > -512
Mese block -1024 no change
Make y of 1st density increase deeper but following a similar logic to before:
Ore, upper limit
Coal 0 no change
Iron -64 no change
Tin -128 no change
Copper -64 > -256
Gold -256 > -1024
Diamond -256 > -1024
Mese crystal -256 > -1024
Mese block -2048 new
Add second, denser layer of mese blocks with a decrease of separation and
increase in density equal to mese ore layers.
The tnt:boom node doesn't actually need the on_construct and on_timer functions to remove the node after 0.4 seconds as the tnt_explode function already does this beforehand.
Liquids that are 'igniters', such as lava, will drop the torch without
a flame-extinguish sound, as the torch item will burn up after a few
seconds with a sound and smoke particles.
All other liquids cause a flame-extinguish sound.
Only register floatland biomes if mgv7 'biomerepeat' flag is false.
Simplify floatland biomes to coniferous forest and ocean.
Make 'mgv7_floatland_level' and 'mgv7_shadow_limit' parameters global
values for mods to use to register their own floatland biomes.
Previous times were chosen using statistical maths, but reports suggested
this was too long.
I tested by timing an ABM acting on 100 nodes, with interval and chance equal
to the old sapling ABM.
50 at 4m59s.
99 at 24m58s.
100 at 26m58s.
So choose a grow time between 5 and 25 min for tree and bush saplings.
If 'can grow' is false at grow time the timer is reset to 5 min.
This allows us to preserve mgv6 ore distribution while giving us the freedom
to alter ore distribution for other mapgens.
Other mapgens are larger scale and have 3D noise tunnels which make vertical
travel easier, so ores can be deeper.
Other mapgens have registered biomes which allows us to limit ores to certain
biomes.
It is useful for protection mods to know who owns an exploding
TNT block. This allows the blocks destroyed by the TNT to be
limited to the same ones the owner could destroy without using
TNT.
TNT placed within a protected area by the area owner, and later
ignited by another player will destroy within the protected area
nodes the igniter may not otherwise be able to interact with. Any
player could significantly increase the size of an explosion by
placing more TNT in an adjacent unprotected area if the original
TNT block was placed withing 1 node of such a boundary. This
feature sounds dangerous, but we are talking about TNT. Players
should use it carefully.
If backface culling is not specified for a tile in 'images' it is set to true.
Slabs already have backface culling due to being defined as nodeboxes (which
are then converted to meshnodes).
Really large books just waste hard drive space and the engine is not designed to
handle that much data in item metadata, this can cause strange things to happen.
No longer have 2 recipes for stairs, choose the one that matches the appearence
in inventory (stair rising toward the right).
Helps to reduce recipe count now that an increasing number of stairs are
being registered.
Alter the wooden trapdoor side texture, replacing the white area with a
repetition of the wood pixels.
It is now consistent with the steel trapdoor side texture.
This keeps the filenames the same, but adds a new "inside" double texture
for the open chest.
Use regular drawtype for closed chest and delete the "cube.obj" model.
X-flip the right-side texture for the closed chest.
Revert the new 'default:game' inventory back to the old 'main' and use the
lbm to restore the contents of the chest.
Change the name of the conversion LBM to ensure it is run again on already
converted chests.
Adds a mesh model that appears when a chest is opened. The chest
stays visibly open as long as the player keeps it open. When the
player closes the formspec, the chest returns back to the closed
shape. While opening and closing, a sound plays.
A second person inspecting the chest will trigger a second sound
open. However, only after the last player closes the chest, does the
chest actually visually close and is the sound close played. This
keeps mesh updates to a minimum.
While it's possible that a server shutting down may cause chests
to remain open, this does not affect the chests' working matter,
and opening or closing them should fix them.
Old chests are converted to the new style by LBM. I previously
had them converted on open but this was unreliable, and LBMs
don't have that problem.
Open chests cannot be dug up. This prevents people from keeping
a chest open and digging it out as well, since closing a chest
would place a chest back (swap) at the spot. We could protect
against this, but it still messes up the client and causes a lot
of "missing node inventory" error messages otherwise. It's
unlikely but possible that a player lagging out causes a chest
to stay "open" and thus unremovable by digging, but there are
other ways of dealing with that - a server restart fixes that
issue.
If the lid of the chest is obstructed, the sounds continue to play,
but the lid isn't opened. Obstructed means that a node is present
above the chest lid, however, we ignore several node types like signs,
torches (not 3d) and wallmounted nodeboxes (typically signs) since
they don't pose any major obstruction in almost any case, and are
typically found above chests. Additionally, the selection box of the
opened chest does not include the lid, and so one can still interact
with e.g. a sign behind an open lid.
Due to the fact that chests now have 7+ textures, we can no longer
use materials (limit: 6) to texture the chest, and so there is now
a single UV mapped image that applies both to open and closed chests.
While this does mean texture pack makers need to create it, this
is extremely simple and consists of a simple cut'n'paste over the
template and should be really easy to do. Only one texture file is
now then used for both open and closed chests.
Previously i had matched ore density to moreores, but this density was
too high and out of balance with MTGame, reduce density to be similar
to copper ore.
The 2 levels of underground ore were overlapping, fix.
Textures are actually by kilbith, update credits.
Also credit kilbith for bronze, copper, gold and steel blocks, credits
had not been updated at the time.
Use Calinou's textures from moreores mod.
Craft bronze from tin and copper instead of steel and copper.
Match ore density to the moreores mod but start ore at a depth of
y = -32 to be part of the depth progression of other ores.
Commit 73d61cbb103415c9a3970eaf2c48aeadabfff828 makes skeleton keys
craftitems rather than tools, warranting the move from tools.lua
to craftitems.lua.
Allow skeleton keys to be stacked by converting them to craftitems and
adding a few lines of code to add a new itemstack to the inventory with
the new key or drop it at the player position if the inventory is full.