This implements a node-timer based leafdecay mechanism, and exposes
an API to use it in mods.
The API is documented in game_api.txt.
`default.register_leafdecay(leafdecaydef)`
`leafdecaydef` is a table, with following members:
{
trunks = { "default:tree"}, -- nodes considered trunks
leaves = { "default:leaves", "default:apple"}, -- nodes considered leaves
radius = 3, -- activates leafdecay this far from the trunk
}
The algorithm will drop `leaves` items in the area if no `trunks` are found
in the `trunk_radius` sized area around the position of the leaf. If a node
listed in `leaves` has a group `leafdecay_drop > 0`, then the item is dropped,
otherwise the item is removed but not dropped.
The algorithm also implements a value `default.leafdecay_speed` (default
15) which can be modified to increase or decrease of the leaf decay. The
algorithm will vary the actual speed a bit to introduce randomness.
Leaf decay is randomized by 0.1 seconds to reduce the chance that
decay happens many times on the same second interval. This requires
nodetimer_interval to be set to values lower than 1.0 to have an
effect.
The leaves will decay between 2 and 10 seconds after digging the trunk,
and happen at non-integer second intervals.
-- The API was added by sofar.
This code adds the key concept to minetest_game, and integrates it
with lockable nodes. Currently supported lockable items are the Steel
Door, the Steel Trapdoor, and the Locked Chest.
The goal of this modification is to introduce a fine-grained multi-
player permission system that is intuitive and usable without any
console or chat commands, and doesn't require extra privileges to
be granted or setup. Keys can also physically be conveyed to other
players, adding to gameplay and adding some personality that is
preferable to console commands or editing formspecs.
A skeleton key can be crafted with 1 gold ingot. Skeleton keys can
then be matched to a lockable node by right-clicking the skeleton
key on a lockable node, which changes the skeleton key to a "key".
Gold was chosen as it's currently a not-so very useful item, and
therefore it's likely that players have some, but aren't really
using it for any purpose.
This key can subsequently used by any player to open or access that
lockable node, including retrieving items from Locked Chests, or
putting items in them.
They key is programmed to fit only the particular locked node it is
programmed to. This is achieved by storing a secret value in both
key and locked node. If this secret value doesn't match, the key
will not open the locked node. This allows many keys to be created
for one chest or door, but a key will only fit one node ever. The
secrets are stored in node, and item meta for the key.
If a locked node is removed, all keys that opened it are no longer
valid. Even if a new door/chest is placed in exactly the same spot,
the old keys will no longer fit that node.
Keys can be smelted back in gold ingots if they are no longer useful.
The method of storing a secret in nodemeta and itemstackmeta is secure
as there is no way for the client to create new items on the server
with a particular secret metadata value. Even if you could possible
create such an itemstack on the client, the server does not ever read
itemstackmeta from a client package.
The patch adds an API that allows other nodes and nodes added by
mods to use the same keys as well. The method how to implement this
is described in game_api.txt. The mod should add 2 callbacks to it's
node definition. Example code is given.
Textures are from PixelBOX, thanks to Gambit.
This is all the working code from SmallJoker's boost_cart, poored into
a more suitable form for minetest_game.
- Mesecons and moreores stuff was removed entirely.
- Textures were all renamed and moved out of default/
- Updated license, readme.txt, attribution
- Changed code license to MIT, left artwork at CC0
- removed default:rail and made aliases for it
- :carts:rail is now carts:rail.
- localized entity def
- removed copper rail entirely
- startstop rail was removed, as well as detector rail
- remodeled to b3d using stujones11 excellent blend model, but sizes
of cart adjusted to make pixel sizes consistent (0.625) everywhere.
- slightly more complex texture map for the cart (front/side visibly
different)
- rail parameters are passed as a separate def table, and stored in
a private list. This avoids having to call `get_meta` on every
node. In return, we need the node name, though.
- adds metal sounds (based on default metal sound function) and
cart moving sound.
- reduced cart speeds to max 7, 5 by pushing.
- Added on_step() rail event handler, gets called when a cart is on
a rail.
- Added various rebased updates from upstream (thanks Krock)
- Included a fix that removes the 'reverse jiggle' when stopping.
- Included reworked textures by sofar.
The mod namespace is still public, but I'm NOT declaring it an API. I'd
rather see it localized instead, for now. Any public interface in this
code is *experimental* at best, and should be considered non-stable and
unsupported for now.
The purpose of this is to allow mods to be able to interact (e.g. fill up)
an empty bucket when it is used to punch a node that's not a liquid source
or when punching a custom entity (e.g. milking a cow).
River water needs to be 'liquid_renewable = false' to avoid a mess caused by
spreading of sources, however picking it up with a bucket then creates
a hole in the river. Allow a 'force-renew' of the source node if it has a
source neighbour.
Pass nodename to tnt.burn function where possible to reduce
use of 'get_node'.
Change 'ipairs' to 'pairs'.
Use 'nodeupdate_single(pos)' instead of 'nodeupdate(pos)' to
avoid every node triggering recursion, the loop itself takes
the place of recursion and works upwards through horizontal
planes as required.
I've rewritten this to use connected nodeboxes, but with a caveat. In
order to make flat nodes look better, I'm keeping one non-connected
pane that is flat around to convert flat sections to the flat nodes
instead of connected, as these look better and are easier to work
with. Once more sides are needed we convert the panes on the fly to
connected nodes and recalculate the shape.
We don't paint any of the half-panes that the previous generation of
xpanes did. There's no need and it's harder to work with. Updating the
nodes also seems more natural and placement and removal works straight
forward.
The conversion of old panes relies on an LBM, and does a reasonable
conversion job, but it's not exact, since the panes behave slightly
different now.
The game API documentation was wrong to begin with. We discard param
nr. 2 of the API entirely, and correct the tile usage text.
Other screwdriver mods, or mods that cause rotation, might operate without the screwdriver mod loaded and have `screwdriver.disallow` unavailable.
This allows nodes to default to full-disallow rather than full-rotation in such a situation.
Nyancats are independent in the default mod. Nothing else uses them or
their code. Separating it into a separate mod makes it easier for
subgames to remove them. It also makes it easier for a mod to depend
on nyancats, as lots of subgames don't have them.
Default/mapgen.lua: Register biomes, ores and decorations in
singlenode mapgen. These were never disabled anyway because
singlenode was removed from the world creation menu.
Allow water to turn cobble slab and stairs to turn into mossy versions.
There is no crafting recipe for mossy stairs and mossy slabs, the
stair/slab API has been modified to allow for a recipeitem that
is `nil`, which will omit adding a crafting recipe for these two
items. The API documentation is updated.
The slabs and stairs will turn mossy when water is adjacent, just like
cobblestone. You can either farm mossy versions by placing them in
water for a while, then collecting them, or run water over your craft.
Introduces an `on_blast(luaobj, damage)` callback that mods can attach
to an entity def. The function will get called with the damage that
TNT would make.
The function should return three values:
bool do_damage, bool do_knockback, table drops
do_damage allows the mod to tell the TNT code to perform damage on
the entity for the mod. The mod code should not do anything with
the entity HP. The entity should not be immortal. If false, then
the entity will not be damaged by the TNT mod.
do_knockback allows the mod to tell the TNT mod to perform an
entity knockback effect. If false, no knockback effect is applied
to the entity.
the drops table is a list of items to drop. It may be nil. E.g. {
"wool:red" }.
I've documented both on_blast() API methods in game_api.txt. It is
a better place than lua_api.txt.
Adds a minor helper function that allows efficient retrieval of
several inventories from a node inventory. We use this helper to
quickly retrieve the items in chests, vessel shelves, book shelves
and furnaces, and return these with the nodes itself to the TNT caller.
The TNT caller then performs the entity physics, and we don't need
to do anything else.
We disable TNT doing anything with bones.
We expose a bug in the code that drops the items - metadata was lost
entirely. This patch corrects that by properly copying the metadata
and creating the drops list inclusive metadata.
These basic connected wall nodes automatically connect
to neigboring stone blocks, other wall blocks and anything
that's "cracky". The do not connect to wood (fences will do
that).
The walls are generated using a new walls.register() API.
Documentation on the API is included in game_api.txt.
This change requires minetest/minetest#3503.
Walls are added for all cobble stone materials. They generally
look best and are the natural use cases for these materials.
This patch replaces the default door nodes with a new mesh model
and nodes.
Two new models were added that are 2 blocks high. One for left-hinge
and one for right-hinge doors. This allows us to make a single texture
fit on both models. The alternative would have been 1 model and 2
unmapped textures, which is more work for mod developers.
Doors work exactly like the old doors, including ownership, breaking
doors, opening and closing.
Under the hood, we can prevent the top part of the door from being
obstructed by placing an invisible node. This prevents liquids from
flowing through doors or people placing sand or other blocks in the
top half. The door code automatically places and removes these as
needed.
Metadata is used to store door state, just like the old version.
A doors API is added, it allows mods to use the API to open/close or
toggle door states without worrying about sounds, permissions and
other details. This is intended for e.g. mesecons. This API allows
mods to manipulate or inspect doors for players or for themselves.
In-game old door nodes are automatically converted using an ABM and
preserve ownership and orientation and state.
TNT blows up all doors and trapdoors except for the steel ones,
who can survive a blast. We return an itemstack in on_blast(),
which requires a TNT API patch which is also pending.
We enable backface culling for most of these doors, as this gives
the identical visual appearance that the old doors had. In the case
of the glass door, there's a slight twist.
The texture files used by the new doors have new names that do
not conflict with previous texture file names to avoid texture
pack conflicts.
Thanks to red-001 <red-001@users.noreply.github.com> for some
of the conversion code, cleanups, and extra textures.
This converts the call to minetest.register() for the default
fence node, so it can be called by other mods to quickly
setup other fences.
Since this creates an API, insert it into the game_api.txt.
The api looks like minetest.register(name, {def}), and has two
uncommon fields: "texture" and "material". Any normal nodedef
property can be passed through, except "drawtype". The "fence"
group will always be added.
The default fence recipe is modified to be as follows:
wood, stick, wood
wood, stick, wood
This recipe yields 4 fence nodes.
This allows us to create according recipes for acacia, pine,
aspen, and junglewood fences without adding new stick types:
pine wood, stick, pine wood
pine wood, stick, pine wood
This is a from-scratch implementation, written by heart but inspired
by (#665 - Add many wooden fences).
Stick and fences nodes are named in a consistent way.
Rename in game.conf and documentation
Update game_api.txt documentation for bucket API and tree functions
Fix tab, space and comment formatting in game_api.txt
Rename in mod READMEs
MarkuBu
rubenwardy
Auke Kok
Fernando Carmona Varo
LNJ
paramat
bas080
tenplus1
Tim
red-001
Rui914
red-001
PilzAdam
Wuzzy
Novatux
MT-Modder
BlockMen
Jeija
Jat
webdesigner97