Update tsm_railcorridors

- 0.12.0
- Cobwebs
- Cave spider spawners
- Tons of bugfixes

mods/MAPGEN/tsm_railcorridors/README.md

@@ -1,11 +1,12 @@
 # Railway corridors [`tsm_railcorridors`]
 MineClone 2 adaption. NO TREASURER SUPPORT!
 
-* Current version 0.11.0
+* Current version 0.12.0
 
 Minetest mod for adding underground corridors with rails and wood constructions with
 a few treasure chests now and then. Optional Treasurer support is available for adding
 treasures from various mods.
+Cobwebs are added if the `mobs_monster` mod is found.
 
 Use the advanced settings to finetune the railway corridors.
 

mods/MAPGEN/tsm_railcorridors/depends.txt

@@ -4,3 +4,4 @@ mcl_core
 mcl_loot
 mcl_tnt
 mcl_farming
+mcl_mobspawners

mods/MAPGEN/tsm_railcorridors/gameconfig.lua

@@ -10,6 +10,8 @@ tsm_railcorridors.nodes = {
 	rail = "mcl_minecarts:rail",
 	torch_floor = "mcl_torches:torch",
 	torch_wall = "mcl_torches:torch_wall",
+	cobweb = "mcl_core:cobweb",
+	spawner = "mcl_mobspawners:spawner",
 
 	--[[ Wood types for the corridors. Corridors are made out of full wood blocks
 	and posts. For each corridor system, a random wood type is chosen with the chance
@@ -27,6 +29,11 @@ function tsm_railcorridors.get_default_treasure(pr)
 	-- UNUSED IN MINECLONE 2!
 end
 
+-- All spawners spawn cave spiders
+function tsm_railcorridors.on_construct_spawner(pos)
+	mcl_mobspawners.setup_spawner(pos, "mobs_mc:cave_spider")
+end
+
 -- MineClone 2's treasure function. Gets all treasures for a single chest.
 -- Based on information from Minecraft Wiki.
 function tsm_railcorridors.get_treasures(pr)

mods/MAPGEN/tsm_railcorridors/init.lua

@@ -15,7 +15,7 @@ end
 -- Wahrscheinlichkeit für jeden Chunk, solche Gänge mit Schienen zu bekommen
 -- Probability for every newly generated chunk to get corridors
 local probability_railcaves_in_chunk = P(0.3)
-setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_railcaves_in_chunk"))
+setting = tonumber(minetest.settings:get("tsm_railcorridors_probability_railcaves_in_chunk"))
 if setting then
 	probability_railcaves_in_chunk = P(setting)
 end
@@ -24,11 +24,11 @@ end
 -- Minimal and maximal value of path length (forks don't look up this value)
 local way_min = 4;
 local way_max = 7;
-setting = tonumber(minetest.setting_get("tsm_railcorridors_way_min"))
+setting = tonumber(minetest.settings:get("tsm_railcorridors_way_min"))
 if setting then
 	way_min = setting
 end
-setting = tonumber(minetest.setting_get("tsm_railcorridors_way_max"))
+setting = tonumber(minetest.settings:get("tsm_railcorridors_way_max"))
 if setting then
 	way_max = setting
 end
@@ -36,7 +36,7 @@ end
 -- Wahrsch. für jeden geraden Teil eines Korridors, Fackeln zu bekommen
 -- Probability for every horizontal part of a corridor to be with torches
 local probability_torches_in_segment = P(0.5)
-setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_torches_in_segment"))
+setting = tonumber(minetest.settings:get("tsm_railcorridors_probability_torches_in_segment"))
 if setting then
 	probability_torches_in_segment = P(setting)
 end
@@ -44,7 +44,7 @@ end
 -- Wahrsch. für jeden Teil eines Korridors, nach oben oder nach unten zu gehen
 -- Probability for every part of a corridor to go up or down
 local probability_up_or_down = P(0.2)
-setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_up_or_down"))
+setting = tonumber(minetest.settings:get("tsm_railcorridors_probability_up_or_down"))
 if setting then
 	probability_up_or_down = P(setting)
 end
@@ -52,7 +52,7 @@ end
 -- Wahrscheinlichkeit für jeden Teil eines Korridors, sich zu verzweigen – vorsicht, wenn fast jeder Gang sich verzweigt, kann der Algorithums unlösbar werden und MT hängt sich auf
 -- Probability for every part of a corridor to fork – caution, too high values may cause MT to hang on.
 local probability_fork = P(0.04)
-setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_fork"))
+setting = tonumber(minetest.settings:get("tsm_railcorridors_probability_fork"))
 if setting then
 	probability_fork = P(setting)
 end
@@ -60,18 +60,32 @@ end
 -- Wahrscheinlichkeit für jeden geraden Teil eines Korridors eine Kiste zu enthalten
 -- Probability for every part of a corridor to contain a chest
 local probability_chest = P(0.05)
-setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_chest"))
+setting = tonumber(minetest.settings:get("tsm_railcorridors_probability_chest"))
 if setting then
 	probability_chest = P(setting)
 end
 
 -- Probability for a rail corridor system to be damaged
 local probability_damage = P(1.0)
-setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_damage"))
+setting = tonumber(minetest.settings:get("tsm_railcorridors_probability_damage"))
 if setting then
 	probability_damage = P(setting)
 end
 
+-- Enable cobwebs
+local place_cobwebs = true
+setting = minetest.settings:get_bool("tsm_railcorridors_place_cobwebs")
+if setting ~= nil then
+	place_cobwebs = setting
+end
+
+-- Enable mob spawners
+local place_mob_spawners = true
+setting = minetest.settings:get_bool("tsm_railcorridors_place_mob_spawners")
+if setting ~= nil then
+	place_mob_spawners = setting
+end
+
 -- Max. and min. heights between rail corridors are generated
 local height_min
 if mcl_vars.mg_lava then
@@ -82,16 +96,20 @@ end
 local height_max = mcl_util.layer_to_y(60)
 
 -- Chaos Mode: If enabled, rail corridors don't stop generating when hitting obstacles
-local chaos_mode = minetest.setting_getbool("tsm_railcorridors_chaos") or false
+local chaos_mode = minetest.settings:get_bool("tsm_railcorridors_chaos") or false
 
 -- Parameter Ende
 
--- random generator
+-- Random generators
-local pr
+local pr, webperlin_major, webperlin_minor
 local pr_initialized = false
 
 local function InitRandomizer(seed)
+	-- Mostly used for corridor gen.
 	pr = PseudoRandom(seed)
+	-- Used for cobweb generation, both noises have to reach a high value for cobwebs to appear
+	webperlin_major = PerlinNoise(934, 3, 0.6, 500)
+	webperlin_minor = PerlinNoise(834, 3, 0.6, 50)
 	pr_initialized = true
 end
 
@@ -104,13 +122,17 @@ local function SetNodeIfCanBuild(pos, node, check_above)
 	if check_above then
 		local abovename = minetest.get_node({x=pos.x,y=pos.y+1,z=pos.z}).name
 		local abovedef = minetest.registered_nodes[abovename]
-		if abovename == "unknown" or abovename == "ignore" or (abovedef.groups and abovedef.groups.attached_node) or abovedef.liquidtype ~= "none" then
+		if abovename == "unknown" or abovename == "ignore" or
+				(abovedef.groups and abovedef.groups.attached_node) or
+				-- This is done because cobwebs are often fake liquids
+				(abovedef.liquidtype ~= "none" and abovename ~= tsm_railcorridors.nodes.cobweb) then
 			return false
 		end
 	end
 	local name = minetest.get_node(pos).name
 	local def = minetest.registered_nodes[name]
-	if name ~= "unknown" and name ~= "ignore" and def.is_ground_content then
+	if name ~= "unknown" and name ~= "ignore" and def.is_ground_content and
+			(def.liquidtype == "none" or name == tsm_railcorridors.nodes.cobweb) then
 		minetest.set_node(pos, node)
 		return true
 	else
@@ -157,7 +179,7 @@ end
 -- * Avoids floating rails for non-solid nodes like air
 -- Returns true if all nodes could be set
 -- Returns false if setting one or more nodes failed
-local function Cube(p, radius, node)
+local function Cube(p, radius, node, replace_air_only)
 	local y_top = p.y+radius
 	local nodedef = minetest.registered_nodes[node.name]
 	local solid = nodedef.walkable and (nodedef.node_box == nil or nodedef.node_box.type == "regular") and nodedef.liquidtype == "none"
@@ -177,7 +199,13 @@ local function Cube(p, radius, node)
 				end
 				local built = false
 				if ok then
-					built = SetNodeIfCanBuild({x=xi,y=yi,z=zi}, node)
+					if replace_air_only ~= true then
+						built = SetNodeIfCanBuild({x=xi,y=yi,z=zi}, node)
+					else
+						if minetest.get_node({x=xi,y=yi,z=zi}).name == "air" then
+							built = SetNodeIfCanBuild({x=xi,y=yi,z=zi}, node)
+						end
+					end
 				end
 				if not built then
 					built_all = false
@@ -199,12 +227,8 @@ local function Platform(p, radius, node)
 	end
 end
 
-
--- Random chest items
--- Zufälliger Kisteninhalt
-
 -- chests
-local function Place_Chest(pos, param2)
+local function PlaceChest(pos, param2)
 	if SetNodeIfCanBuild(pos, {name=tsm_railcorridors.nodes.chest, param2=param2}) then
 		local meta = minetest.get_meta(pos)
 		local inv = meta:get_inventory()
@@ -214,6 +238,43 @@ local function Place_Chest(pos, param2)
 		end
 	end
 end
+
+-- Try to place a cobweb.
+-- pos: Position of cobweb
+-- needs_check: If true, checks if any of the nodes above, below or to the side of the cobweb.
+-- side_vector: Required if needs_check is true. Unit vector which points towards the side of the cobweb to place.
+local function TryPlaceCobweb(pos, needs_check, side_vector)
+	local check_passed = false
+	if needs_check then
+		-- Check for walkable nodes above, below or at the side of the cobweb.
+		-- If any of those nodes is walkable, we are fine.
+		local check_vectors = {
+			side_vector,
+			{x=0, y=1, z=0},
+			{x=0, y=-1, z=0},
+		}
+
+		for c=1, #check_vectors do
+
+			local cpos = vector.add(pos, check_vectors[c])
+			local cname = minetest.get_node(cpos).name
+			local cdef = minetest.registered_nodes[cname]
+			if cname ~= "ignore" and cdef.walkable then
+				check_passed = true
+				break
+			end
+		end
+
+	else
+		check_passed = true
+	end
+
+	if check_passed then
+		return SetNodeIfCanBuild(pos, {name=tsm_railcorridors.nodes.cobweb})
+	else
+		return false
+	end
+end
 	
 local function WoodBulk(pos, wood)
 	SetNodeIfCanBuild({x=pos.x+1, y=pos.y, z=pos.z+1}, {name=wood})
@@ -228,7 +289,7 @@ end
 -- Returns <success>, <segments>
 -- success: true if corridor could be placed entirely
 -- segments: Number of segments successfully placed
-local function corridor_part(start_point, segment_vector, segment_count, wood, post, is_final)
+local function corridor_part(start_point, segment_vector, segment_count, wood, post, is_final, up_or_down_prev)
 	local p = {x=start_point.x, y=start_point.y, z=start_point.z}
 	local torches = pr:next() < probability_torches_in_segment
 	local dir = {0, 0}
@@ -247,7 +308,16 @@ local function corridor_part(start_point, segment_vector, segment_count, wood, p
 		if not chaos_mode and segmentindex > 0 and not dug then return false, segmentindex end
 		-- Add wooden platform, if neccessary. To avoid floating rails
 		if segment_vector.y == 0 then
-			Platform({x=p.x, y=p.y-1, z=p.z}, 1, node_wood)
+			if segmentindex == 0 and up_or_down_prev then
+				-- Thin 1×1 platform directly after going up or down.
+				-- This is done to avoid placing too much wood at slopes
+				Platform({x=p.x-dir[2], y=p.y-1, z=p.z-dir[1]}, 0, node_wood)
+				Platform({x=p.x, y=p.y-1, z=p.z}, 0, node_wood)
+				Platform({x=p.x+dir[2], y=p.y-1, z=p.z+dir[1]}, 0, node_wood)
+			else
+				-- Normal 3×3 platform
+				Platform({x=p.x, y=p.y-1, z=p.z}, 1, node_wood)
+			end
 		end
 		-- Diese komischen Holz-Konstruktionen
 		-- These strange wood structs
@@ -332,16 +402,16 @@ local function corridor_part(start_point, segment_vector, segment_count, wood, p
 		p = vector.add(p, segment_vector)
 	end
 
-	-- End of the corridor; create the final piece
+	-- End of the corridor segment; create the final piece
-	if is_final then
+	local dug = Cube(p, 1, {name="air"})
-		local dug = Cube(p, 1, {name="air"})
+	if not chaos_mode and not dug then return false, segment_count end
-		if not chaos_mode and not dug then return false, segment_count end
+	if segment_vector.y == 0 then
 		Platform({x=p.x, y=p.y-1, z=p.z}, 1, node_wood)
 	end
 	return true, segment_count
 end
 
-local function corridor_func(waypoint, coord, sign, up_or_down, up, wood, post, is_final, up_or_down_next, damage)
+local function corridor_func(waypoint, coord, sign, up_or_down, up_or_down_next, up_or_down_prev, up, wood, post, is_final, damage, no_spawner)
 	local segamount = 3
 	if up_or_down then
 		segamount = 1
@@ -373,7 +443,7 @@ local function corridor_func(waypoint, coord, sign, up_or_down, up, wood, post,
 	if up_or_down and up == false then
 		Cube(waypoint, 1, {name="air"})
 	end
-	local corridor_dug, corridor_segments_dug = corridor_part(start, vek, segcount, wood, post, is_final)
+	local corridor_dug, corridor_segments_dug = corridor_part(start, vek, segcount, wood, post, is_final, up_or_down_prev)
 	local corridor_vek = {x=vek.x*segcount, y=vek.y*segcount, z=vek.z*segcount}
 
 	-- nachträglich Schienen legen
@@ -407,6 +477,7 @@ local function corridor_func(waypoint, coord, sign, up_or_down, up, wood, post,
 		railsegcount = segcount
 	end
 	for i=1,railsegcount do
+		-- Precalculate chest position
 		local p = {x=waypoint.x+vek.x*i, y=waypoint.y+vek.y*i-1, z=waypoint.z+vek.z*i}
 		if (minetest.get_node({x=p.x,y=p.y-1,z=p.z}).name=="air" and minetest.get_node({x=p.x,y=p.y-3,z=p.z}).name~=tsm_railcorridors.nodes.rail) then
 			p.y = p.y - 1;
@@ -414,16 +485,69 @@ local function corridor_func(waypoint, coord, sign, up_or_down, up, wood, post,
 				chestplace = chestplace + 1
 			end
 		end
-		if IsRailSurface({x=p.x,y=p.y-1,z=p.z}) then
+
-			PlaceRail(p, damage)
+		-- Chest
-		end
 		if i == chestplace then
 			if minetest.get_node({x=p.x+vek.z,y=p.y-1,z=p.z-vek.x}).name == post then
 				chestplace = chestplace + 1
 			else
-				Place_Chest({x=p.x+vek.z,y=p.y,z=p.z-vek.x}, minetest.dir_to_facedir(vek))
+				PlaceChest({x=p.x+vek.z,y=p.y,z=p.z-vek.x}, minetest.dir_to_facedir(vek))
 			end
 		end
+
+		-- Mob spawner (at center)
+		if place_mob_spawners and tsm_railcorridors.nodes.spawner and not no_spawner and
+				webperlin_major:get3d(p) > 0.3 and webperlin_minor:get3d(p) > 0.5 then
+			-- Place spawner (if activated in gameconfig),
+			-- enclose in cobwebs and setup the spawner node.
+			local spawner_placed = SetNodeIfCanBuild(p, {name=tsm_railcorridors.nodes.spawner})
+			if spawner_placed then
+				local size = 1
+				if webperlin_major:get3d(p) > 0.5 then
+					size = 2
+				end
+				if place_cobwebs then
+					Cube(p, size, {name=tsm_railcorridors.nodes.cobweb}, true)
+				end
+				tsm_railcorridors.on_construct_spawner(p)
+				no_spawner = true
+			end
+		end
+
+		-- Main rail; this places almost all the rails
+		if IsRailSurface({x=p.x,y=p.y-1,z=p.z}) then
+			PlaceRail(p, damage)
+		end
+
+		-- Place cobwebs left and right in the corridor
+		if place_cobwebs and tsm_railcorridors.nodes.cobweb then
+			-- Helper function to place a cobweb at the side (based on chance an Perlin noise)
+			local cobweb_at_side = function(basepos, vek)
+				if pr:next(1,5) == 1 then
+					local h = pr:next(0, 2) -- 3 possible cobweb heights
+					local cpos = {x=basepos.x+vek.x, y=basepos.y+h, z=basepos.z+vek.z}
+					if webperlin_major:get3d(cpos) > 0.05 and webperlin_minor:get3d(cpos) > 0.1 then
+						if h == 0 then
+							-- No check neccessary at height offset 0 since the cobweb is on the floor
+							return TryPlaceCobweb(cpos)
+						else
+							-- Check nessessary
+							return TryPlaceCobweb(cpos, true, vek)
+						end
+					end
+				end
+				return false
+			end
+
+			-- Right cobweb
+			local rvek = {x=-vek.z, y=0, z=vek.x}
+			cobweb_at_side(p, rvek)
+
+			-- Left cobweb
+			local lvek = {x=vek.z, y=0, z=-vek.x}
+			cobweb_at_side(p, lvek)
+
+		end
 	end
 	
 	local offset = table.copy(corridor_vek)
@@ -435,28 +559,32 @@ local function corridor_func(waypoint, coord, sign, up_or_down, up, wood, post,
 		else
 			offset[coord] = offset[coord] + segamount
 			final_point = vector.add(waypoint, offset)
+			-- After going up or down, 1 missing rail piece must be added
 			if IsRailSurface({x=final_point.x,y=final_point.y-2,z=final_point.z}) then
 				PlaceRail({x=final_point.x,y=final_point.y-1,z=final_point.z}, damage)
 			end
 		end
 	end
 	if not corridor_dug then
-		return false
+		return false, no_spawner
 	else
-		return final_point
+		return final_point, no_spawner
 	end
 end
 
-local function start_corridor(waypoint, coord, sign, length, psra, wood, post, damage)
+local function start_corridor(waypoint, coord, sign, length, psra, wood, post, damage, no_spawner)
 	local wp = waypoint
 	local c = coord
 	local s = sign
 	local ud = false -- up or down
 	local udn = false -- up or down is next
+	local udp = false -- up or down was previous
 	local up
 	for i=1,length do
 		local needs_platform
-		-- Up or down?
+		-- Update previous up/down status
+		udp = ud
+		-- Update current up/down status
 		if udn then
 			needs_platform = NeedsPlatform(wp)
 			if needs_platform then
@@ -475,23 +603,23 @@ local function start_corridor(waypoint, coord, sign, length, psra, wood, post, d
 		else
 			ud = false
 		end
-		-- Update up/down next
+		-- Update next up/down status
 		if pr:next() < probability_up_or_down and i~=1 and not udn and not needs_platform then
 			udn = i < length
 		elseif udn and not needs_platform then
 			udn = false
 		end
 		-- Make corridor / Korridor graben
-		wp = corridor_func(wp,c,s, ud, up, wood, post, i == length, udn, damage)
+		wp, no_spawner = corridor_func(wp,c,s, ud, udn, udp, up, wood, post, i == length, damage, no_spawner)
 		if wp == false then return end
 		-- Verzweigung?
 		-- Fork?
 		if pr:next() < probability_fork then
 			local p = {x=wp.x, y=wp.y, z=wp.z}
-			start_corridor(wp, c, s, pr:next(way_min,way_max), psra, wood, post, damage)
+			start_corridor(wp, c, s, pr:next(way_min,way_max), psra, wood, post, damage, no_spawner)
 			if c == "x" then c="z" else c="x" end
-			start_corridor(wp, c, s, pr:next(way_min,way_max), psra, wood, post, damage)
+			start_corridor(wp, c, s, pr:next(way_min,way_max), psra, wood, post, damage, no_spawner)
-			start_corridor(wp, c, not s, pr:next(way_min,way_max), psra, wood, post, damage)
+			start_corridor(wp, c, not s, pr:next(way_min,way_max), psra, wood, post, damage, no_spawner)
 			WoodBulk({x=p.x, y=p.y-1, z=p.z}, wood)
 			WoodBulk({x=p.x, y=p.y,   z=p.z}, wood)
 			WoodBulk({x=p.x, y=p.y+1, z=p.z}, wood)
@@ -526,11 +654,13 @@ local function place_corridors(main_cave_coords, psra)
 	if pr:next(0, 100) < 50 then
 		Cube(main_cave_coords, 4, {name=tsm_railcorridors.nodes.dirt})
 		Cube(main_cave_coords, 3, {name="air"})
+		-- Center rail
 		PlaceRail({x=main_cave_coords.x, y=main_cave_coords.y-3, z=main_cave_coords.z}, damage)
 		main_cave_coords.y =main_cave_coords.y - 1
 	else
 		Cube(main_cave_coords, 3, {name=tsm_railcorridors.nodes.dirt})
 		Cube(main_cave_coords, 2, {name="air"})
+		-- Center rail
 		PlaceRail({x=main_cave_coords.x, y=main_cave_coords.y-2, z=main_cave_coords.z}, damage)
 	end
 	local xs = pr:next(0, 2) < 1
@@ -555,15 +685,15 @@ local function place_corridors(main_cave_coords, psra)
 	end
 	local wood = tsm_railcorridors.nodes.corridor_woods[woodtype].wood
 	local post = tsm_railcorridors.nodes.corridor_woods[woodtype].post
-	start_corridor(main_cave_coords, "x", xs, pr:next(way_min,way_max), psra, wood, post, damage)
+	start_corridor(main_cave_coords, "x", xs, pr:next(way_min,way_max), psra, wood, post, damage, false)
-	start_corridor(main_cave_coords, "z", zs, pr:next(way_min,way_max), psra, wood, post, damage)
+	start_corridor(main_cave_coords, "z", zs, pr:next(way_min,way_max), psra, wood, post, damage, false)
 	-- Auch mal die andere Richtung?
 	-- Try the other direction?
 	if pr:next(0, 100) < 70 then
-		start_corridor(main_cave_coords, "x", not xs, pr:next(way_min,way_max), psra, wood, post, damage)
+		start_corridor(main_cave_coords, "x", not xs, pr:next(way_min,way_max), psra, wood, post, damage, false)
 	end
 	if pr:next(0, 100) < 70 then
-		start_corridor(main_cave_coords, "z", not zs, pr:next(way_min,way_max), psra, wood, post, damage)
+		start_corridor(main_cave_coords, "z", not zs, pr:next(way_min,way_max), psra, wood, post, damage, false)
 	end
 end
 
@@ -572,10 +702,12 @@ minetest.register_on_generated(function(minp, maxp, blockseed)
 	if minp.y < height_max and maxp.y > height_min and pr:next() < probability_railcaves_in_chunk then
 		-- Get semi-random height in chunk
 
-		local buffer = 4
+		local buffer = 5
-		local y = pr:next(minp.y, maxp.y)
+		local y = pr:next(minp.y + buffer, maxp.y - buffer)
 		y = math.floor(math.max(height_min + buffer, math.min(height_max - buffer, y)))
-		local p = {x=minp.x+(maxp.x-minp.x)/2, y=y, z=minp.z+(maxp.z-minp.z)/2}
+
+		-- Mid point of the chunk
+		local p = {x=minp.x+math.floor((maxp.x-minp.x)/2), y=y, z=minp.z+math.floor((maxp.z-minp.z)/2)}
 		-- Haupthöhle und alle weiteren
 		-- Corridors; starting with main cave out of dirt
 		place_corridors(p, pr)

mods/MAPGEN/tsm_railcorridors/init.lua2

@@ -1,602 +0,0 @@
-tsm_railcorridors = {}
-
--- Load node names
-dofile(minetest.get_modpath(minetest.get_current_modname()).."/gameconfig.lua")
-
--- Settings
-local setting
-
--- Probability function
--- TODO: Check if this is correct
-local P = function (float)
-	return math.floor(32767 * float)
-end
-
--- Wahrscheinlichkeit für jeden Chunk, solche Gänge mit Schienen zu bekommen
--- Probability for every newly generated chunk to get corridors
-local probability_railcaves_in_chunk = P(0.3)
-setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_railcaves_in_chunk"))
-if setting then
-	probability_railcaves_in_chunk = P(setting)
-end
-
--- Innerhalb welcher Parameter soll sich die Pfadlänge bewegen? (Forks heben den Maximalwert auf)
--- Minimal and maximal value of path length (forks don't look up this value)
-local way_min = 4;
-local way_max = 7;
-setting = tonumber(minetest.setting_get("tsm_railcorridors_way_min"))
-if setting then
-	way_min = setting
-end
-setting = tonumber(minetest.setting_get("tsm_railcorridors_way_max"))
-if setting then
-	way_max = setting
-end
-
--- Wahrsch. für jeden geraden Teil eines Korridors, Fackeln zu bekommen
--- Probability for every horizontal part of a corridor to be with torches
-local probability_torches_in_segment = P(0.5)
-setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_torches_in_segment"))
-if setting then
-	probability_torches_in_segment = P(setting)
-end
-
--- Wahrsch. für jeden Teil eines Korridors, nach oben oder nach unten zu gehen
--- Probability for every part of a corridor to go up or down
-local probability_up_or_down = P(0.2)
-setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_up_or_down"))
-if setting then
-	probability_up_or_down = P(setting)
-end
-
--- Wahrscheinlichkeit für jeden Teil eines Korridors, sich zu verzweigen – vorsicht, wenn fast jeder Gang sich verzweigt, kann der Algorithums unlösbar werden und MT hängt sich auf
--- Probability for every part of a corridor to fork – caution, too high values may cause MT to hang on.
-local probability_fork = P(0.04)
-setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_fork"))
-if setting then
-	probability_fork = P(setting)
-end
-
--- Wahrscheinlichkeit für jeden geraden Teil eines Korridors eine Kiste zu enthalten
--- Probability for every part of a corridor to contain a chest
-local probability_chest = P(0.05)
-setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_chest"))
-if setting then
-	probability_chest = P(setting)
-end
-
--- Probability for a rail corridor system to be damaged
-local probability_damage = P(1.0)
-setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_damage"))
-if setting then
-	probability_damage = P(setting)
-end
-
--- Max. and min. heights between rail corridors are generated
-local height_min
-if mcl_vars.mg_lava then
-	height_min = mcl_vars.mg_lava_overworld_max + 2
-else
-	height_min = mcl_vars.mg_bedrock_overworld_max + 2
-end
-local height_max = mcl_util.layer_to_y(60)
-
--- Chaos Mode: If enabled, rail corridors don't stop generating when hitting obstacles
-local chaos_mode = minetest.setting_getbool("tsm_railcorridors_chaos") or false
-
--- Parameter Ende
-
--- random generator
-local pr
-local pr_initialized = false
-
-local function InitRandomizer(seed)
-	pr = PseudoRandom(seed)
-	pr_initialized = true
-end
-
-
--- Checks if the mapgen is allowed to carve through this structure and only sets
--- the node if it is allowed. Does never build in liquids.
--- If check_above is true, don't build if the node above is attached (e.g. rail)
--- or a liquid.
-local function SetNodeIfCanBuild(pos, node, check_above)
-	if check_above then
-		local abovename = minetest.get_node({x=pos.x,y=pos.y+1,z=pos.z}).name
-		local abovedef = minetest.registered_nodes[abovename]
-		if abovename == "unknown" or abovename == "ignore" or (abovedef.groups and abovedef.groups.attached_node) or abovedef.liquidtype ~= "none" then
-			return false
-		end
-	end
-	local name = minetest.get_node(pos).name
-	local def = minetest.registered_nodes[name]
-	if name ~= "unknown" and name ~= "ignore" and def.is_ground_content then
-		minetest.set_node(pos, node)
-		return true
-	else
-		return false
-	end
-end
-
--- Tries to place a rail, taking the damage chance into account
-local function PlaceRail(pos, damage_chance)
-	if damage_chance ~= nil and damage_chance > 0 then
-		local x = pr:next(0,100)
-		if x <= damage_chance then
-			return false
-		end
-	end
-	return SetNodeIfCanBuild(pos, {name=tsm_railcorridors.nodes.rail})
-end
-
--- Returns true if the node as point can be considered “ground”, that is, a solid material
--- in which mine shafts can be built into, e.g. stone, but not air or water
-local function IsGround(pos)
-	local nodename = minetest.get_node(pos).name
-	local nodedef = minetest.registered_nodes[nodename]
-	return nodename ~= "unknown" and nodename ~= "ignore" and nodedef.is_ground_content and nodedef.walkable and nodedef.liquidtype == "none"
-end
-
--- Returns true if rails are allowed to be placed on top of this node
-local function IsRailSurface(pos)
-	local nodename = minetest.get_node(pos).name
-	local nodedef = minetest.registered_nodes[nodename]
-	return nodename ~= "unknown" and nodename ~= "ignore" and nodedef.walkable and (nodedef.node_box == nil or nodedef.node_box.type == "regular")
-end
-
--- Checks if the node is empty space which requires to be filled by a platform
-local function NeedsPlatform(pos)
-	local node = minetest.get_node({x=pos.x,y=pos.y-1,z=pos.z})
-	local node2 = minetest.get_node({x=pos.x,y=pos.y-2,z=pos.z})
-	local nodedef = minetest.registered_nodes[node.name]
-	return node.name ~= "ignore" and node.name ~= "unknown" and nodedef.is_ground_content and ((nodedef.walkable == false and node2.name ~= tsm_railcorridors.nodes.dirt) or (nodedef.groups and nodedef.groups.falling_node))
-end
-
--- Create a cube filled with the specified nodes
--- Specialties:
--- * Avoids floating rails for non-solid nodes like air
--- Returns true if all nodes could be set
--- Returns false if setting one or more nodes failed
-local function Cube(p, radius, node)
-	local y_top = p.y+radius
-	local nodedef = minetest.registered_nodes[node.name]
-	local solid = nodedef.walkable and (nodedef.node_box == nil or nodedef.node_box.type == "regular") and nodedef.liquidtype == "none"
-	-- Check if all the nodes could be set
-	local built_all = true
-	for zi = p.z-radius, p.z+radius do
-		for yi = y_top, p.y-radius, -1 do
-			for xi = p.x-radius, p.x+radius do
-				local ok = false
-				if not solid and yi == y_top then
-					local topdef = minetest.registered_nodes[minetest.get_node({x=xi,y=yi+1,z=zi}).name]
-					if not (topdef.groups and topdef.groups.attached_node) and topdef.liquidtype == "none" then
-						ok = true
-					end
-				else
-					ok = true
-				end
-				local built = false
-				if ok then
-					built = SetNodeIfCanBuild({x=xi,y=yi,z=zi}, node)
-				end
-				if not built then
-					built_all = false
-				end
-			end
-		end
-	end
-	return built_all
-end
-
-local function Platform(p, radius, node)
-	for zi = p.z-radius, p.z+radius do
-		for xi = p.x-radius, p.x+radius do
-			local np = NeedsPlatform({x=xi,y=p.y,z=zi})
-			if np then
-				minetest.set_node({x=xi,y=p.y-1,z=zi}, node)
-			end
-		end
-	end
-end
-
-
--- Random chest items
--- Zufälliger Kisteninhalt
-
--- chests
-local function Place_Chest(pos, param2)
-	if SetNodeIfCanBuild(pos, {name=tsm_railcorridors.nodes.chest, param2=param2}) then
-		local meta = minetest.get_meta(pos)
-		local inv = meta:get_inventory()
-		local items = tsm_railcorridors.get_treasures(pr)
-		for i=1, math.min(#items, inv:get_size("main")) do
-			inv:set_stack("main", i, ItemStack(items[i]))
-		end
-	end
-end
-	
-local function WoodBulk(pos, wood)
-	SetNodeIfCanBuild({x=pos.x+1, y=pos.y, z=pos.z+1}, {name=wood})
-	SetNodeIfCanBuild({x=pos.x-1, y=pos.y, z=pos.z+1}, {name=wood})
-	SetNodeIfCanBuild({x=pos.x+1, y=pos.y, z=pos.z-1}, {name=wood})
-	SetNodeIfCanBuild({x=pos.x-1, y=pos.y, z=pos.z-1}, {name=wood})
-end
-
--- Gänge mit Schienen
--- Corridors with rails
-
--- Returns <success>, <segments>
--- success: true if corridor could be placed entirely
--- segments: Number of segments successfully placed
-local function corridor_part(start_point, segment_vector, segment_count, wood, post, is_final)
-	local p = {x=start_point.x, y=start_point.y, z=start_point.z}
-	local torches = pr:next() < probability_torches_in_segment
-	local dir = {0, 0}
-	local torchdir = {1, 1}
-	local node_wood = {name=wood}
-	local node_fence = {name=post}
-	if segment_vector.x == 0 and segment_vector.z ~= 0 then
-		dir = {1, 0}
-		torchdir = {5, 4}
-	elseif segment_vector.x ~= 0 and segment_vector.z == 0 then
-		dir = {0, 1}
-		torchdir = {3, 2}
-	end
-	for segmentindex = 0, segment_count-1 do
-		local dug = Cube(p, 1, {name="air"})
-		if not chaos_mode and segmentindex > 0 and not dug then return false, segmentindex end
-		-- Add wooden platform, if neccessary. To avoid floating rails
-		if segment_vector.y == 0 then
-			Platform({x=p.x, y=p.y-1, z=p.z}, 1, node_wood)
-		end
-		-- Diese komischen Holz-Konstruktionen
-		-- These strange wood structs
-		if segmentindex % 2 == 1 and segment_vector.y == 0 then
-			local calc = {
-				p.x+dir[1], p.z+dir[2], -- X and Z, added by direction
-				p.x-dir[1], p.z-dir[2], -- subtracted
-				p.x+dir[2], p.z+dir[1], -- orthogonal
-				p.x-dir[2], p.z-dir[1], -- orthogonal, the other way
-			}
-			--[[ Shape:
-				WWW
-				P.P
-				PrP
-				pfp
-			W = wood
-			P = post (above floor level)
-			p = post (in floor level, only placed if no floor)
-			
-			From previous generation (for reference):
-			f = floor
-			r = rail
-			. = air
-			]]
-
-			-- Don't place those wood structs below open air
-			if not (minetest.get_node({x=calc[1], y=p.y+2, z=calc[2]}).name == "air" and
-				minetest.get_node({x=calc[3], y=p.y+2, z=calc[4]}).name == "air" and
-				minetest.get_node({x=p.x, y=p.y+2, z=p.z}).name == "air") then
-
-				-- Left post and planks
-				local left_ok = true
-				left_ok = SetNodeIfCanBuild({x=calc[1], y=p.y-1, z=calc[2]}, node_fence)
-				if left_ok then left_ok = SetNodeIfCanBuild({x=calc[1], y=p.y  , z=calc[2]}, node_fence) end
-				if left_ok then left_ok = SetNodeIfCanBuild({x=calc[1], y=p.y+1, z=calc[2]}, node_wood) end
-
-				-- Right post and planks
-				local right_ok = true
-				right_ok = SetNodeIfCanBuild({x=calc[3], y=p.y-1, z=calc[4]}, node_fence)
-				if right_ok then right_ok = SetNodeIfCanBuild({x=calc[3], y=p.y  , z=calc[4]}, node_fence) end
-				if right_ok then right_ok = SetNodeIfCanBuild({x=calc[3], y=p.y+1, z=calc[4]}, node_wood) end
-
-				-- Middle planks
-				local top_planks_ok = false
-				if left_ok and right_ok then top_planks_ok = SetNodeIfCanBuild({x=p.x, y=p.y+1, z=p.z}, node_wood) end
-
-				if minetest.get_node({x=p.x,y=p.y-2,z=p.z}).name=="air" then
-					if left_ok then SetNodeIfCanBuild({x=calc[1], y=p.y-2, z=calc[2]}, node_fence) end
-					if right_ok then SetNodeIfCanBuild({x=calc[3], y=p.y-2, z=calc[4]}, node_fence) end
-				end
-				-- Torches on the middle planks
-				if torches and top_planks_ok then
-					-- Place torches at horizontal sides
-					SetNodeIfCanBuild({x=calc[5], y=p.y+1, z=calc[6]}, {name=tsm_railcorridors.nodes.torch_wall, param2=torchdir[1]}, true)
-					SetNodeIfCanBuild({x=calc[7], y=p.y+1, z=calc[8]}, {name=tsm_railcorridors.nodes.torch_wall, param2=torchdir[2]}, true)
-				end
-			elseif torches then
-				-- Try to build torches instead of the wood structs
-				local node = {name=tsm_railcorridors.nodes.torch_floor, param2=minetest.dir_to_wallmounted({x=0,y=-1,z=0})}
-
-				-- Try two different height levels
-				local pos1 = {x=calc[1], y=p.y-2, z=calc[2]}
-				local pos2 = {x=calc[3], y=p.y-2, z=calc[4]}
-				local nodedef1 = minetest.registered_nodes[minetest.get_node(pos1).name]
-				local nodedef2 = minetest.registered_nodes[minetest.get_node(pos2).name]
-
-				if nodedef1.walkable then
-					pos1.y = pos1.y + 1
-				end
-				SetNodeIfCanBuild(pos1, node, true)
-
-				if nodedef2.walkable then
-					pos2.y = pos2.y + 1
-				end
-				SetNodeIfCanBuild(pos2, node, true)
-
-			end
-		end
-		
-		-- nächster Punkt durch Vektoraddition
-		-- next way point
-		p = vector.add(p, segment_vector)
-	end
-
-	-- End of the corridor; create the final piece
-	if is_final then
-		local dug = Cube(p, 1, {name="air"})
-		if not chaos_mode and not dug then return false, segment_count end
-		Platform({x=p.x, y=p.y-1, z=p.z}, 1, node_wood)
-	end
-	return true, segment_count
-end
-
-local cobwebperlin
-
-local function corridor_func(waypoint, coord, sign, up_or_down, up, wood, post, is_final, up_or_down_next, damage)
-	local segamount = 3
-	if up_or_down then
-		segamount = 1
-	end
-	if sign then
-		segamount = 0-segamount
-	end
-	local vek = {x=0,y=0,z=0};
-	local start = table.copy(waypoint)
-	if coord == "x" then
-		vek.x=segamount
-		if up_or_down and up == false then
-			start.x=start.x+segamount
-		end
-	elseif coord == "z" then
-		vek.z=segamount
-		if up_or_down and up == false then
-			start.z=start.z+segamount
-		end
-	end
-	if up_or_down then
-		if up then
-			vek.y = 1
-		else
-			vek.y = -1
-		end
-	end
-	local segcount = pr:next(4,6)
-	if up_or_down and up == false then
-		Cube(waypoint, 1, {name="air"})
-	end
-	local corridor_dug, corridor_segments_dug = corridor_part(start, vek, segcount, wood, post, is_final)
-	local corridor_vek = {x=vek.x*segcount, y=vek.y*segcount, z=vek.z*segcount}
-
-	-- nachträglich Schienen legen
-	-- after this: rails
-	segamount = 1
-	if sign then
-		segamount = 0-segamount
-	end
-	if coord == "x" then
-		vek.x=segamount
-	elseif coord == "z" then
-		vek.z=segamount
-	end
-	if up_or_down then
-		if up then
-			vek.y = 1
-		else
-			vek.y = -1
-		end
-	end
-	local chestplace = -1
-	if corridor_dug and not up_or_down and pr:next() < probability_chest then
-		chestplace = pr:next(1,segcount+1)
-	end
-	local railsegcount
-	if not chaos_mode and not corridor_dug then
-		railsegcount = corridor_segments_dug * 3
-	elseif not up_or_down then
-		railsegcount = segcount * 3
-	else
-		railsegcount = segcount
-	end
-	for i=1,railsegcount do
-		local p = {x=waypoint.x+vek.x*i, y=waypoint.y+vek.y*i-1, z=waypoint.z+vek.z*i}
-		if (minetest.get_node({x=p.x,y=p.y-1,z=p.z}).name=="air" and minetest.get_node({x=p.x,y=p.y-3,z=p.z}).name~=tsm_railcorridors.nodes.rail) then
-			p.y = p.y - 1;
-			if i == chestplace then
-				chestplace = chestplace + 1
-			end
-		end
-		if IsRailSurface({x=p.x,y=p.y-1,z=p.z}) then
-			PlaceRail(p, damage)
-		end
-		if i == chestplace then
-			if minetest.get_node({x=p.x+vek.z,y=p.y-1,z=p.z-vek.x}).name == post then
-				chestplace = chestplace + 1
-			else
-				Place_Chest({x=p.x+vek.z,y=p.y,z=p.z-vek.x}, minetest.dir_to_facedir(vek))
-			end
-		else
-			cobwebperlin = cobwebperlin or minetest.get_perlin(1234, 3, 1.0, 30)
-
-			-- Place random cobwebs
-			
-			local webposses = {
-				{x=p.x+vek.z,y=p.y,z=p.z-vek.x},
-				{x=p.x-vek.z,y=p.y,z=p.z+vek.x},
-			}
-			for w=1, #webposses do
-				local webpos = webposses[w]
-				if cobwebperlin:get3d(webpos) > 0.65 then
-					local h = pr:next(0,2)
-					webpos.y = webpos.y + h
-					SetNodeIfCanBuild(webpos, {name="mcl_core:cobweb"})
-				end
-			end
-		end
-	end
-	
-	local offset = table.copy(corridor_vek)
-	local final_point = vector.add(waypoint, offset)
-	if up_or_down then
-		if up then
-			offset.y = offset.y - 1
-			final_point = vector.add(waypoint, offset)
-		else
-			offset[coord] = offset[coord] + segamount
-			final_point = vector.add(waypoint, offset)
-			if IsRailSurface({x=final_point.x,y=final_point.y-2,z=final_point.z}) then
-				PlaceRail({x=final_point.x,y=final_point.y-1,z=final_point.z}, damage)
-			end
-		end
-	end
-	if not corridor_dug then
-		return false
-	else
-		return final_point
-	end
-end
-
-local function start_corridor(waypoint, coord, sign, length, psra, wood, post, damage)
-	local wp = waypoint
-	local c = coord
-	local s = sign
-	local ud = false -- up or down
-	local udn = false -- up or down is next
-	local up
-	for i=1,length do
-		local needs_platform
-		-- Up or down?
-		if udn then
-			needs_platform = NeedsPlatform(wp)
-			if needs_platform then
-				ud = false
-			end
-			ud = true
-			-- Force direction near the height limits
-			if wp.y >= height_max - 12 then
-				up = false
-			elseif wp.y <= height_min + 12 then
-				up = true
-			else
-				-- Chose random direction in between
-				up = pr:next(0, 2) < 1
-			end
-		else
-			ud = false
-		end
-		-- Update up/down next
-		if pr:next() < probability_up_or_down and i~=1 and not udn and not needs_platform then
-			udn = i < length
-		elseif udn and not needs_platform then
-			udn = false
-		end
-		-- Make corridor / Korridor graben
-		wp = corridor_func(wp,c,s, ud, up, wood, post, i == length, udn, damage)
-		if wp == false then return end
-		-- Verzweigung?
-		-- Fork?
-		if pr:next() < probability_fork then
-			local p = {x=wp.x, y=wp.y, z=wp.z}
-			start_corridor(wp, c, s, pr:next(way_min,way_max), psra, wood, post, damage)
-			if c == "x" then c="z" else c="x" end
-			start_corridor(wp, c, s, pr:next(way_min,way_max), psra, wood, post, damage)
-			start_corridor(wp, c, not s, pr:next(way_min,way_max), psra, wood, post, damage)
-			WoodBulk({x=p.x, y=p.y-1, z=p.z}, wood)
-			WoodBulk({x=p.x, y=p.y,   z=p.z}, wood)
-			WoodBulk({x=p.x, y=p.y+1, z=p.z}, wood)
-			WoodBulk({x=p.x, y=p.y+2, z=p.z}, wood)
-			return
-		end
-		-- coord und sign verändern
-		-- randomly change sign and coord
-		if c=="x" then
-			c="z"
-		elseif c=="z" then
-			c="x"
-	 	end;
-		s = pr:next(0, 2) < 1
-	end
-end
-
-local function place_corridors(main_cave_coords, psra)
-	--[[ ALWAYS start building in the ground. Prevents corridors starting
-	in mid-air or in liquids. ]]
-	if not IsGround(main_cave_coords) then
-		return
-	end
-
-	-- Determine if this corridor system is “damaged” (some rails removed) and to which extent
-	local damage = 0
-	if pr:next() < probability_damage then
-		damage = pr:next(10, 50)
-	end
-	--[[ Starter cube: A big hollow dirt cube from which the corridors will extend.
-	Corridor generation starts here. ]]
-	if pr:next(0, 100) < 50 then
-		Cube(main_cave_coords, 4, {name=tsm_railcorridors.nodes.dirt})
-		Cube(main_cave_coords, 3, {name="air"})
-		PlaceRail({x=main_cave_coords.x, y=main_cave_coords.y-3, z=main_cave_coords.z}, damage)
-		main_cave_coords.y =main_cave_coords.y - 1
-	else
-		Cube(main_cave_coords, 3, {name=tsm_railcorridors.nodes.dirt})
-		Cube(main_cave_coords, 2, {name="air"})
-		PlaceRail({x=main_cave_coords.x, y=main_cave_coords.y-2, z=main_cave_coords.z}, damage)
-	end
-	local xs = pr:next(0, 2) < 1
-	local zs = pr:next(0, 2) < 1;
-
-	-- Select random wood type (found in gameconfig.lua)
-	local rnd = pr:next(1,1000)
-
-	local woodtype = 1
-	local accumulated_chance = 0
-	for w=1, #tsm_railcorridors.nodes.corridor_woods do
-		local woodtable = tsm_railcorridors.nodes.corridor_woods[w]
-		accumulated_chance = accumulated_chance + woodtable.chance
-		if accumulated_chance > 1000 then
-			minetest.log("warning", "[tsm_railcorridors] Warning: Wood chances add up to over 100%!")
-			break
-		end
-		if rnd <= accumulated_chance then
-			woodtype = w
-			break
-		end
-	end
-	local wood = tsm_railcorridors.nodes.corridor_woods[woodtype].wood
-	local post = tsm_railcorridors.nodes.corridor_woods[woodtype].post
-	start_corridor(main_cave_coords, "x", xs, pr:next(way_min,way_max), psra, wood, post, damage)
-	start_corridor(main_cave_coords, "z", zs, pr:next(way_min,way_max), psra, wood, post, damage)
-	-- Auch mal die andere Richtung?
-	-- Try the other direction?
-	if pr:next(0, 100) < 70 then
-		start_corridor(main_cave_coords, "x", not xs, pr:next(way_min,way_max), psra, wood, post, damage)
-	end
-	if pr:next(0, 100) < 70 then
-		start_corridor(main_cave_coords, "z", not zs, pr:next(way_min,way_max), psra, wood, post, damage)
-	end
-end
-
-minetest.register_on_generated(function(minp, maxp, blockseed)
-	InitRandomizer(blockseed)
-	if minp.y < height_max and maxp.y > height_min and pr:next() < probability_railcaves_in_chunk then
-		-- Get semi-random height in chunk
-
-		local buffer = 4
-		local y = pr:next(minp.y, maxp.y)
-		y = math.floor(math.max(height_min + buffer, math.min(height_max - buffer, y)))
-		local p = {x=minp.x+(maxp.x-minp.x)/2, y=y, z=minp.z+(maxp.z-minp.z)/2}
-		-- Haupthöhle und alle weiteren
-		-- Corridors; starting with main cave out of dirt
-		place_corridors(p, pr)
-	end
-end)